GEA will exhibit solutions for heating, cooling, and air conditioning at the upcoming trade fair: IFH/Intherm

Press Release

22. 02. 2008 IFH/Intherm 2008, from 16 to 19 April, in Nuremberg, Germany, in Hall 7, and at Stand 7422/7424

This duo creates excellent room climate: the GEA SiCo induction convector SBI (shown at the left in the image), and the GEA SiCo floor convector SBQ (shown at the right in the image). Thanks to their identical exterior measurements and common accessories,
This duo creates excellent room climate: the GEA SiCo induction convector SBI (shown at the left in the image), and the GEA SiCo floor convector SBQ (shown at the right in the image). Thanks to their identical exterior measurements and common accessories, they can be combined to provide an optimally appealing liner configuration.
Optimal for buildings with large-area glass façades: the GEA SiCo floor convector SBQ (shown here), and the GEA SiCo induction convector SBI. A combination of these SBQ and SBI models allows perfect satisfaction of heating, cooling, and fresh-air require
Optimal for buildings with large-area glass façades: the GEA SiCo floor convector SBQ (shown here), and the GEA SiCo induction convector SBI. A combination of these SBQ and SBI models allows perfect satisfaction of heating, cooling, and fresh-air requirements – and implementation of a virtually invisible climate-control system for rooms. Exploitation of the Coandă effect here enables great performance efficiency without drafts in areas occupied by people.

Heating solutions with double and triple benefits

On the occasion of IFH/Intherm, the specialist trade fair for sanitary engineering and HVAC in Nuremberg, GEA Happel Klimatechnik GmbH from Herne, Germany, will present selected solutions for effective temperature control of office, hotel, industrial, as well as home applications. The GEA fair presentation will focus on room-installed heating systems that additionally offer double and triple functions. These extra functions enable cooling as well as ventilation, in addition to heating.

In this connection, two systems from the GEA SilentComfort range that went into series production in 2007 are especially worthy of note:  the GEA SiCo floor convector SBQ, and its sister model the GEA SiCo induction convector SBI. Both of these models “disappear” upon installation under raised floors and are therefore exceptionally well suited for modern architecture with large-area glass façades. They are available with superior-quality cover grating in the following selection of finishes:  natural aluminium; anodized finishes in brass, bronze, or black; as well as stainless steel (further options are available upon request).

The SBQ unit (photo) with its cross-flow fan enables energy-efficient and comfortable heating and cooling of such facilities as offices, museums, sales rooms, and public buildings. Despite its 230-volt power feed, these systems are extremely safe owing to end-to-end 24-volt engineering. This characteristic – plus exploitation of the Coandă effect for no-draft air circulation – make the SBQ convector unit absolutely unique.

With its identical exterior dimensions, the GEA SiCo floor convector SBI ideally complements the SBQ recirculated-air unit. The SBI convector is an induction unit that is installed near the building façade, under raised floors, and that is connected to a central ventilation plant. In such a configuration, however, it is not only the primary air flow that is used for heating or cooling. On the induction principle, the primary air upon output pulls secondary air out of the room after it, and this secondary air is supplied into the room together with the primary air. The secondary air flows through a heat exchanger before it mixes with the primary air, and rises up along the façade.

Combinations of the SBQ and SBI models allow meeting the requirements posed by various room-occupancy densities and supply-air requirements. These possibilities offer planning specialists the liberty of providing great heating and cooling capacities, as well as energy-efficient air exchange in the rooms served. An additional plus factor of this equipment:  they are highly suitable for dry cooling, which contributes to especially hygienic operation.

In addition to its floor convectors, GEA Happel Klimatechnik will show additional products at IFH/Intherm. The followed models are planned for exhibit:

  • A GEA MultiMAXX air-treatment unit
  • A GEA RoofJETT roof extract fan for air exhaust
  • The fan-coil units GEA Flex Geko, GEA TriStyle Geko, and GEA Cassette Geko
  • A poster with selected models involving the GEA MATRIX control system.
    The GEA acqua small-scale air conditioning system

For details on the products stated above, please see the press material “Well Tempered” from January 2008.

Uwaga dotycząca publikacji: W przypadku publikacji, prosimy o przesłanie do naszego archiwum kopii z opublikowanego artykułu.

Powrót

Czy masz pytania?

Nicole HückelsSenior Manager Press Relations and Trade FairsTelefon: +49 234 980 2584Fax: +49 234 980 34 2584
Ta strona korzysta z plików cookies aby zapewnić Ci najlepszą jakość podczas przeglądania naszej strony. Odwiedzając [www.kelvion.com] zagadzasz się na [korzystanie z plików cookies].