Evaporative cooling tower, water cooling, heat transfer, heat rejection, counter flow

CMDIF Series

Polacel CMDIF Cooling towers with FRP frame are designed to cool low to medium water flows. The modular range Polacel CMDIF can meet easily most cooling needs and to all constraints in terms of space, whether for a new project or for an adaptation to an existing basin when replacing an existing tower. Polacel CMDIF cooling towers can be installed independently, one beside the other (in-line configuration) or in a back to back configuration. The thermal performance of these cooling towers is optimal and operation is effective. Because they can recycle about 95% of the cooled water, the Polacel CMDIF cooling towers represent the best solution for the preservation of the environment.

slider_image
Kelvion Modular Cooling Tower CMDI
slider_image
Kelvion Modular Cooling Tower CMDI

Selecting a cooling tower
The water temperatures (hot water in and cold water out), the wet bulb temperature of the site of installation, the required water flow and the noise level are the 4 major factors in order to select a wet cooling tower. After analyzing your needs, we will propose the most appropriate technical and economic solution.There are Polacel CMDIF standard solutions for every need starting from a water flow to cool of 500 m3/h. Our engineers can also make special adaptations of the standard cooling towers in order to meet the most specific of your needs.The various type of available heat exchange surfaces allows us to select a suitable fill whether of the "film" type or of the "splash" type . The heat exchange fill is chosen according to the quality of water to be cooled (clean or highly polluted water), but also depending on the specific environment of the site and considering to the process to be cooled. In all cases, a chemical treatment of the cooling water is required. This shall be implemented by a specialized company based on the maximum concentration values ​​advocated by Kelvion.

Advantages
  • Wide range from any water flow above 500 m3/h allowing a sizing of the cooling towers the closest to the required capacity,
  • Specific design for each application or environnement (wind, seismic zone)
  • Maintenance and reduced power consumption.
  • Maximum efficiency throughout the life of the cooling tower.
  • Components and materials of superior quality that meet our strictest standards.
  • Effective project management.
Get in touch with Kelvion in United States of America Or give us a call +1 800 774 0474
Personal Data
Your Request
Attachments
?
Remove
CMDIF 740 - 1500
Type CMDIF 740 CMDIF 960 CMDIF 1200 CMDIF 1500
Wet surface (m²) 74 96 120 150
Drive type gearbox gearbox gearbox gearbox
CMDIF 1800 - 3000
Type CMDIF 1800 CMDIF 2200 CMDIF 2600 CMDIF 3000
Wet surface (m²) 180 220 260 300
Drive type gearbox gearbox gearbox gearbox
{f:translate (key=LLL:fileadmin/Kelvion/Project/Resources/Private/Language/locallang.xlf:layout.ajax_loader)}
This website uses cookies to ensure you get the best experience on our website. By visiting www.kelvion.com you agree to the use of cookies.