Industrial dual discharge air coolers (Stainless steel/Aluminium)

Goedhart DRS

The Goedhart DRS range of dual discharge customized ceiling mounted air coolers can be used in both cooling and working room applications.

slider_image
Kelvion Goedhart Customized Air Cooler DRS

The Goedhart DRS series is part of our customized series. The advantage: A very high degree of customization is evident. Circuits matched to application give great performance and the optimized heat exchanger geometry have a greater specific output of the heat exchanger. This High Performance Air cooler is available for both air flow directions (draw-through and blow-through). As a result, the Goedhart DRS can be flexibly and effectively designed for individual refrigeration requirements – especially for complex applications.

The coil blocks have stainless tubes expanded into fully collared aluminium fins. A good thermal contact is achieved by expansion of the tubes into the fin collars, that are also utilised as spacers to provide a constant distance between the fins. All coolers are pressure tested to 40 bar (lower by cooling mediums) and are supplied with a light over pressure charge of dried air. Suitable for NH3/CO2/H(C)FC- pump system and DE system and the most coolants.

Advantages
  • Powerful when needed: Application-suited circuit design
  • Dual discharge air throw: draw-through on request
  • Long-term assurance: highly efficient, ErP 2015 fans
  • Low height: The maximum space in the chill room can be utilised
  • Easy installation: Delivered on a wooden frame for easy mounting
  • Easily accessible and easy to clean components: Hinged drip tray prepared, easy removable cover plates
  • Higher specific power, reduced fan speed and air velocity through the coil and significantly reduced current consumption
Get in touch with Kelvion in United States of America Or give us a call +1 800 774 0474
Personal Data
Your Request
Attachments
?
Remove
Technical data
Engineering level Customized products
Application Cooling and working rooms
Number of types 490
Capacities NH3 3,8 – 217 kW (NH3 pump System - SC2)
Capacities CO2 1,8 - 173 kW (CO2 dx - SC2)
Capacities Coolant 3,5 - 262 kW (E-glycol 37% tl1=5°C tin=-7°C tout=-4°C)
Fan diameter 450, 500, 560 and 630 mm
Max. number of fans each aircooler 6
Suitable NH3/CO2/H(C)FC pump System and DE System and the most coolants
Coil execution
Tube pitch square
Fin spacing 4, 7 and 10 mm
Tube material Stainless steel o.d. 15 mm
Fin material Aluminum
Casing
Mounting Construction for ceiling mounting. The flush mounting protects against and prevents accumulation of dust and dirt
Sheet material Casing material of galvanized sheet steel
Finishing Standard white epoxy spray
Connection/Header side Projection by removable end covers, easy removed for maintenance
Drip tray Hinged
Fasteners Stainless steel
Fixing defrost Defrost by hot gas spiral or electric defrost elements will be fixed to the bottom side of the coil
Accessories

  • Blow-through
  • Draw-through    
  • Electrical defrost      
  • Hot gas defrost      
  • Water defrost       
  • Anti-condensation heating drip tray 
  • Fan heating                 
  • Hinged fans      
  • Hinged drip tray    
  • Insulated drip tray
  • Insulated fan plate
  • Polyester drip tray    
Options

  • Insulation disks
  • Feet for floor mounting
  • 60Hz Fans
  • EC Fans
  • 1 Phase Fans
  • Coolants
  • DE System
  • CO2
  • Vertical Connections
  • Other casing materials
  • Other fin spacings
  • Almg fins
  • Goldlack fins
{f:translate (key=LLL:fileadmin/Kelvion/Project/Resources/Private/Language/locallang.xlf:layout.ajax_loader)}
This website uses cookies to ensure you get the best experience on our website. By visiting www.kelvion.com you agree to the use of cookies.