air cooler complete Stainless Steel
Goedhart VRS
The range Goedhart VRS single discharge ceiling mounted customized air coolers are suitable industrial cooling and freezing applications. This range with a complete stainless coil block is especially designed for corrosive surroundings. The possible air direction is blow-through or draw-through (please specify when ordering).
Kelvion Goedhart Customized Air Cooler VRS
The Goedhart VRS series is part of our systematic customized series. The advantage: A very high degree of customization is evident. The coil blocks have stainless tubes expanded into fully collared aluminium fins. A good thermal contact is achieved by expansion of the tubes into the fin collars, that are also utilised as spacers to provide a constant distance between the fins. All coolers are pressure tested to 40 bar (lower by cooling mediums) and are supplied with a light over pressure charge of dried air. Suitable for NH3/CO2/H(C)FC- pump system and de system and the most coolants.
Advantages
- Customize the air cooler with many available options and accessories
- Variable air direction of all fan variants – blow-through as draw-through
- Easy installation: Delivered on a wooden frame for easy mounting
- Powerful when needed: Application-suited circuit design
- Easily accessible and easy to clean components: Hinged drip tray prepared, easy removable cover plates
- Long-term assurance: ErP 2015 fans, increased lifetime in aggressive environments, higher resistance against cleaning chemicals in the food industry (HACCP)
Technical data
| Engineering level | Customized products |
| Application | Hygienic Cooling (complete stainless steel) |
| Number of types | 24 |
| Capacities NH3 | 5 – 55 kW (NH3 pump System - SC2) |
| Capacities CO2 | 4 - 44 kW (CO2 dx - SC2) |
| Capacities Coolant | 6 - 70 kW (E-glycol 37% tl1=5°C tin=-7°C tout=-4°C) |
| Fan diameter | 500 and 630 mm |
| Max. number of fans each aircooler | 4 |
| Air configuration | blow-through (Goedhart® VRe-B), draw-through (Goedhart® VRe-Z) |
| Suitable | NH3/CO2/H(C)FC pump System and DE System and the most coolants |
Coil execution
| Tube pitch | square |
| Fin spacing | 4, 6, 7, 8, 10 and 12 mm |
| Tube material | Stainless steel o.d. 15 mm |
| Fin material | Aluminum |
Casing
| Mounting | Construction for ceiling mounting. The flush mounting protects against and prevents accumulation of dust and dirt |
| Sheet material | Casing material of galvanized sheet steel |
| Finishing | Neutral |
| Connection/Header side | Protection by removable end covers, easy removed for maintenance |
| Drip tray | Hinged prepared |
| Fasteners | Stainless steel |
| Fixing defrost | Defrost by hot gas spiral or electric defrost elements will be fixed to the bottom side of the coil |
Accessories
- Blow-through
- Draw-through
- Electrical defrost
- Hot gas defrost
- Water defrost
- Secondary defrost
- Anti-condensation heating drip tray
- Fan heating
- Hinged fans
- Hinged drip tray
- Insulated drip tray
- Polyester drip tray
- Sock connection
- Sock connection+air straightner
- Defrost sock
- Diffusor
- Diffusor+dampers
Options
- Insulation disks
- Feet for floor mounting
- Fan Hood
- Hood fin side
- 60Hz Fans
- EC Fans
- 1 Phase Fans
- Coolants
- DE System
- CO2
- Vertical Connections
- Other casing materials
- Other fin spacings
- Almg fins
